Control Card

The T50 is a new generation of multimedia player created by NovaStar for full-color LED displays. This

multimedia player integrates playback and sending capabilities, allowing users to publish content and control LED displays with a computer, mobile phone, or tablet. Working with our superior cloud-based publishing and monitoring platforms, the T50 enables users to manage LED displays from an Internet-connected device anywhere, anytime.

Support for multi-screen synchronous playback and synchronous and asynchronous modes makes this multimedia player a perfect fit for a wide range of applications.

Taurus Series Multimedia Player T50 Specifications

Thanks to its reliability, ease of use, and intelligent control, the T50 becomes a winning choice for commercial LED displays and smart city applications such as fixed displays, lamp-post displays, chain store displays, advertisement players, retail store displays, door head displays, shelf displays, and much more.

T50

$365.00

Quantity

Output
 Loading capacity up to 1,300,000 pixels
− Maximum width: 4096 pixels
Maximum height: 4096 pixels
− Non-standard resolutions can be customized in both asynchronous and synchronous modes and the pixel clock of the custom resolutions cannot exceed 153 MHz.
 2x Gigabit Ethernet ports
These two ports serve as primary by default.
Users can also set one as primary and the other as backup.
 1x Stereo audio connector
The audio sample rate is fixed at 48 kHz. If NovaStar’s multifunction card is used for audio output, audio with a sample rate of 48 kHz is required.
 1x HDMI 1.3 connector
− Maximum output: 1920×1200@60Hz
− Support for HDMI loop
Input
 1x HDMI 1.3 connector
In synchronous mode, video sources input from this connector can be scaled to fit the entire screen automatically.
 2x Sensor connectors
Connect to brightness sensors or temperature and humidity sensors.
Control
 1x USB 3.0 (Type A) port
Allows for USB playback, firmware upgrade and storage expansion.
 1x USB (Type B) port
Connects to the control computer for content publishing and screen control.
 1x Gigabit Ethernet port
Connects to the control computer, a LAN or public network for content publishing and screen control.
Performance
 Powerful processing capacity
− Quad-core ARM A55 processor @1.8 GHz
− Support for H.264/H.265 4K@60Hz video decoding
− 1 GB of onboard RAM
− 32 GB of internal storage
 Flawless playback
Support for playback of 2x 4K, 6x 1080p, 10x 720p, or 20x 360p videos
 All-round control plans
− Enables users to publish content and control screens from a computer, mobile phone, or tablet.
− Allows users to publish content and control screens from anywhere, anytime.
− Allows users to monitor screens from anywhere, anytime.
 Switching between Wi-Fi AP and Wi-Fi STA
− In Wi-Fi AP mode, the user terminal is connected to the built-in Wi-Fi hotspot of the T50. The default SSID is “AP+Last 8 digits of SN” and the default password is printed on the SSID label of the product.
− In Wi-Fi STA mode, the user terminal and the T50 are connected to the Wi-Fi hotspot of a router.
 Synchronous and asynchronous modes
− In asynchronous mode, the internal video source works.
− In synchronous mode, the video source input from the HDMI connector works.
 Synchronous playback across multiple screens
Enabling synchronous playback halves the decoding capability of the device.
− NTP time synchronization
− GPS time synchronization (The specified 4G module must be installed.)
− RF time synchronization (The specified RF module must be installed.)
 Support for 4G/5G modules
The T50 ships without a 4G/5G module. Users have to purchase 4G/5G modules separately if needed.
Network connection priority: Wired network >Wi-Fi network > 4G/5G network (This order of priority is followed when the firmware is earlier
than V4.5.0. The networks coexist when the firmware is V4.5.0 or later.)

T50

Features

Certifications

Spec Sheet